Special Offers

Plasma Cutters

CUT40 Inverter Plasma Cutter
Model No. Plasma CUT40

  • Lightweight and portable inverter plasma cutter.
  • Cuts any metal – mild steel, aluminium, stainless steel etc.
  • Minimal distortion on thin metal.
  • Cuts steel up to 12mm thick.
  • No combustible gas required.
  • Comes ready to use complete with torch, earth return, regulator and air hose – all you need is compressed air and a 240v power supply.
CUT40 Inverter Plasma Cutter

RRP
£469.00 exc VAT
£562.80 inc VAT

You Pay Only
£350.00 exc VAT
£420.00 inc VAT

Back To TopBack To Top


CUT60 Inverter Plasma Cutter
Model No. Plasma CUT60

  • Powerful, portable inverter plasma cutter
  • Cuts any metal – mild steel, aluminium, stainless steel etc.
  • Minimal distortion on thin metal
  • Cuts steel up to 20mm thick from a 240v power supply
  • No combustible gas required
  • Comes ready to use complete with torch, earth return, regulator and air hose – all you need is compressed air and a 240v power supply
CUT60 Inverter Plasma Cutter

RRP
£998.00 exc VAT
£1,197.60 inc VAT

You Pay Only
£770.00 exc VAT
£924.00 inc VAT

Back To TopBack To Top

Hydraulic Presses

Hydraulic Press 20tonne Floor Type
Model No. YK20F

  • Standard Hydraulic Range.
  • Detachable pump and ram allowing hydraulics to be used for other purposes when press is not in use.
  • Supplied with gauge.
Hydraulic Press 20tonne Floor Type

RRP
£619.95 exc VAT
£743.94 inc VAT

You Pay Only
£391.97 exc VAT
£470.37 inc VAT

Back To TopBack To Top


Hydraulic Press 30tonne Floor Type
Model No. YK30F

  • Steel frame construction with 2-speed hydraulic pump unit.
  • Sliding hydraulic ram assembly gives 195mm of lateral travel for off-centre pressing applications.
  • Frame head fitted with ram pressure gauge.
  • Supplied with flat pressing plate/V-blocks.
Hydraulic Press 30tonne Floor Type

RRP
£1,099.95 exc VAT
£1,319.94 inc VAT

You Pay Only
£769.97 exc VAT
£923.97 inc VAT

Back To TopBack To Top

Starter/Changers from

Starter/Charger 450/75Amp 12/24V 230V
Model No. SUPERSTART520

  • Features a fast charge timer device to enable rapid battery recovery with a reduced risk of boiling the battery dry.
  • Fast charge facility allows the maximum charge output of the battery to be utilised for up to one hour after which it is automatically cut off.
  • Fitted with a heavy-duty transformer, flush mounted ammeter and variable charge rate controls.
Starter/Charger 450/75Amp 12/24V 230V

RRP
£569.95 exc VAT
£683.94 inc VAT

You Pay Only
£373.77 exc VAT
£448.53 inc VAT

Back To TopBack To Top


Starter/Charger 570/90Amp 12/24V 230V
Model No. SUPERSTART620

  • Features a fast charge timer device to enable rapid battery recovery with a reduced risk of boiling the battery dry.
  • Fast charge facility allows the maximum charge output of the battery to be utilised for up to one hour after which it is automatically cut off.
  • Fitted with a heavy-duty transformer, flush mounted ammeter and variable charge rate controls.
Starter/Charger 570/90Amp 12/24V 230V

RRP
£649.95 exc VAT
£779.94 inc VAT

You Pay Only
£429.77 exc VAT
£515.73 inc VAT

Back To TopBack To Top


Starter/Charger 560/90Amp 12/24V 230V
Model No. START560

  • Heavy-duty starter/charger for professional garages, workshops and bodyshops.
  • Features fast-charge timer device to enable rapid battery recovery with reduced risk of boiling the battery.
  • Caters for all requirements from cars right up to commercial vehicles.
  • Large wheels for easy mobility and features analogue ammeter and switchable charge circuitry for accurate charge control.
Starter/Charger 560/90Amp 12/24V 230V

RRP
£399.95 exc VAT
£479.94 inc VAT

You Pay Only
£223.97 exc VAT
£268.77 inc VAT

Back To TopBack To Top

Boxes from

Truck Box 1065 x 510 x 595mm
Model No. STB02

  • Manufactured from heavy gauge steel with seam welded joints.
  • Folded lips add strength and rigidity. Enamel finish helps prevent corrosion. Box may be secured with a padlock hidden in recess at the front.
  • Features two heavy-duty handles on either end of box for manoeuvrability.
  • Lid is secured with locked arm when open.
  • Fitted with welded feet allowing unit to be moved by forklift.
  • Feet have predrilled holes for the option of securing in one place.
  • Suitable for secure storage of tools and heavy equipment, on site, in vehicle, in the workshop or at home.
Truck Box 1065 x 510 x 595mm

RRP
£329.95 exc VAT
£395.94 inc VAT

You Pay Only
£241.44 exc VAT
£289.73 inc VAT

Back To TopBack To Top


Site Box 1220 x 610 x 700mm
Model No. SSB01

  • Manufactured from heavy gauge steel with seam welded joints.
  • Folded lips add strength and rigidity.
  • Enamel finish helps prevent corrosion.
  • Box may be secured with a padlock hidden in recess at the front.
  • Features two heavy-duty handles on either end of box for manoeuvrability.
  • Lid is secured with locked arm when open.
  • Fitted with welded feet allowing unit to be moved by forklift.
  • Feet have predrilled holes for the option of securing in one place.
  • Suitable for secure storage of tools and heavy equipment, on site, in the workshop or at home.
Site Box 1220 x 610 x 700mm

RRP
£439.95 exc VAT
£527.94 inc VAT

You Pay Only
£335.94 exc VAT
£403.13 inc VAT

Back To TopBack To Top

MIG Welders from

MIG-170 Inverter MIG Welder
Model No. MIG-170

  • Professional 170 Amp inverter MIG welder.
  • 60% duty cycle.
  • Soft start for ease of use.
  • MMA and scratch start TIG capabilities.
  • Can be used with or without gas.
  • Burn back control.
  • Comes complete with MMA leads, Euro MIG torch and gas hose.
MIG-170 Inverter MIG Welder

RRP
£679.00 exc VAT
£814.80 inc VAT

You Pay Only
£504.00 exc VAT
£604.80 inc VAT

Back To TopBack To Top


Professional Gas/No-Gas MIG Welder 210Amp with Euro Torch
Model No. MIGHTYMIG210

  • One of our professional MIGHTYMIG range this large gas/no-gas welder offers excellent performance at an extremely competitive price.
  • This unit is set up ready to go in gas mode but can also be switched easily to use gasless by a simple change of polarity.
  • Supplied with high quality cool running BINZEL® MB15 Euro torch, 1.8mtr earth cable, 1.4mtr gas hose, twin gauged gas regulator, 1kg spool of 0.6mm wire, 0.6 & 0.8mm contact tips.
  • Illustrated with gas bottle to give an indication of size only; gas is not included.
  • A contract for the supply of gas should be arranged with your local gas distributor.
Professional Gas/No-Gas MIG Welder 210Amp with Euro Torch

RRP
£749.95 exc VAT
£899.94 inc VAT

You Pay Only
£419.97 exc VAT
£503.97 inc VAT

Back To TopBack To Top


Professional MIG Welder 230Amp 230V with Binzel® Euro Torch
Model No. SUPERMIG230

  • Excellent continuous performance on car panel thickness material.
  • Forced-Air Cooling System allows high duty cycle.
  • Binzel® non-live Euro torch reduces accidental arcing and is comfortable in the hand thus ensuring a steadier weld bead.
  • Welds stainless and aluminium too.
  • Includes industrial gas regulator, contact tips 0.6, 0.8mm and gas cup.
Professional MIG Welder 230Amp 230V with Binzel® Euro Torch

RRP
£799.95 exc VAT
£959.94 inc VAT

You Pay Only
£496.97 exc VAT
£596.37 inc VAT

Back To TopBack To Top


Professional MIG Welder 250Amp 230V with Binzel® Euro Torch
Model No. SUPERMIG255

  • Excellent continuous performance on car panel thickness material.
  • Forced-Air Cooling System allows high duty cycle.
  • Binzel® non-live Euro torch reduces accidental arcing and is comfortable in the hand thus ensuring a steadier weld bead.
  • Welds stainless steel and aluminium too.
  • Includes industrial gas regulator, contact tip 0.8mm and gas cup.
Professional MIG Welder 250Amp 230V with Binzel® Euro Torch

RRP
£1,195.95 exc VAT
£1,435.14 inc VAT

You Pay Only
£797.97 exc VAT
£957.57 inc VAT

Back To TopBack To Top


Professional MIG Welder 270Amp 230V with Binzel® Euro Torch
Model No. SUPERMIG275

  • Excellent continuous performance on car panel thickness material.
  • Forced-Air Cooling System allows high duty cycle.
  • Binzel® non-live Euro torch reduces accidental arcing and is comfortable in the hand thus ensuring a steadier weld bead.
  • Welds stainless steel and aluminium too.
  • Includes industrial gas regulator, contact tip 0.8mm and gas cup.
Professional MIG Welder 270Amp 230V with Binzel® Euro Torch

RRP
£1,349.95 exc VAT
£1,619.94 inc VAT

You Pay Only
£895.97 exc VAT
£1,075.17 inc VAT

Back To TopBack To Top

Compressors

Inverter Plasma 40Amp with Compressor 230V
Model No. PP35PLUS

  • Weighing only 16.8kg but with the power to cut up to 10mm steel, this machine features an integral compressor.
  • Inverter power supply fitted with plasma cutter control circuitry.
  • Inverter features four LED information panel including torch under-voltage, air fault, general fault (thermostat, over/under-voltage, over-current) and power on.
  • Supplied with plasma torch and earth cable.
  • Uses air to strike arc making it suitable for use near electrical equipment.
  • Ideal for cutting steel, stainless, galvanized steel, aluminium, copper and brass.
  • Includes integral air compressor, air filter and regulator unit with panel-mounted pressure gauge.
  • Requires 30Amp power supply.
  • IP23 Rated.
Inverter Plasma 40Amp with Compressor 230V

RRP
£1,599.95 exc VAT
£1,919.94 inc VAT

You Pay Only
£1,189.97 exc VAT
£1,427.97 inc VAT

Back To TopBack To Top


Compressor 50ltr Belt Drive 3hp with Cast Cylinders & Wheels
Model No. SAC1503B

  • Suitable for the professional workshop, these units are fitted with a genuine 3hp motor.
  • Twin capacitors and a centrifugal switch aid trouble free start up on a 13amp supply.
  • Pumps feature heavy-duty full cast cylinders, capped by alloy heads for improved heat dissipation and long life.
  • Heavy-duty drive guards protect belt and flywheel that is designed to force air over the pump to aid cooling.
  • Supplied with full CE certification, test certificates and operating/maintenance manual.
Compressor 50ltr Belt Drive 3hp with Cast Cylinders & Wheels

RRP
£649.95 exc VAT
£779.94 inc VAT

You Pay Only
£447.97 exc VAT
£537.57 inc VAT

Back To TopBack To Top


Compressor 100ltr Belt Drive 3hp with Cast Cylinders & Wheels
Model No. SAC1103B

  • Suitable for the professional workshop, these units are fitted with a genuine 3hp motor.
  • Twin capacitors and a centrifugal switch aid trouble free start up on a 13amp supply.
  • Pumps feature heavy-duty full cast cylinders, capped by alloy heads for improved heat dissipation and long life.
  • Heavy-duty drive guards protect belt and flywheel that is designed to force air over the pump to aid cooling.
  • Supplied with full CE certification, test certificates and operating/maintenance manual.
Compressor 100ltr Belt Drive 3hp with Cast Cylinders & Wheels

RRP
£729.95 exc VAT
£875.94 inc VAT

You Pay Only
£503.97 exc VAT
£604.77 inc VAT

Back To TopBack To Top


Compressor 150ltr Belt Drive 3hp with Cast Cylinders
Model No. SAC1153B

  • Suitable for the professional workshop, these units are fitted with a genuine 3hp motor.
  • Twin capacitors and a centrifugal switch aid trouble free start up on a 13Amp supply.
  • Pumps feature heavy-duty full cast cylinders, capped by alloy heads for improved heat dissipation and long life.
  • Heavy-duty drive guards protect belt and flywheel that is designed to force air over the pump to aid cooling.
  • Supplied with full CE certification, test certificates and operating/maintenance manual.
Compressor 150ltr Belt Drive 3hp with Cast Cylinders

RRP
£799.95 exc VAT
£959.94 inc VAT

You Pay Only
£559.97 exc VAT
£671.97 inc VAT

Back To TopBack To Top


Compressor 200ltr Belt Drive 3hp with Cast Cylinders
Model No. SAC1203B

  • Suitable for the professional workshop, these units are fitted with a genuine 3hp motor.
  • Twin capacitors and a centrifugal switch aid trouble free start up on a 13Amp supply.
  • Pumps feature heavy-duty full cast cylinders, capped by alloy heads for improved heat dissipation and long life.
  • Heavy-duty drive guards protect belt and flywheel that is designed to force air over the pump to aid cooling.
  • Supplied with full CE certification, test certificates and operating/maintenance manual.
Compressor 200ltr Belt Drive 3hp with Cast Cylinders

RRP
£899.95 exc VAT
£1,079.94 inc VAT

You Pay Only
£615.97 exc VAT
£739.17 inc VAT

Back To TopBack To Top


Compressor 270ltr Belt Drive 7.5hp 3ph 2-Stage with Cast Cylinders
Model No. SAC52775B

  • Heavy-duty three phase compressor suitable for the professional workshop.
  • Two stage pump system coupled with a 7.5hp motor maximises performance to keep running costs low compared to single stage, single phase model.
  • Pump features heavy-duty full cast cylinders, capped by an alloy head for improved heat dissipation and long life.
  • Heavy-duty drive guards protect belt and flywheel that is designed to force air over the pump to aid cooling.
  • Supplied with full CE certification, test certificates and operating/maintenance manual.
Compressor 270ltr Belt Drive 7.5hp 3ph 2-Stage with Cast Cylinders

RRP
£1,999.95 exc VAT
£2,399.94 inc VAT

You Pay Only
£1,511.97 exc VAT
£1,814.37 inc VAT

Back To TopBack To Top


Compressor 50ltr Belt Drive Petrol Engine 4hp
Model No. SA5040

  • Fully mobile compressor with Honda GC135 4hp power unit coupled to heavy-duty, twin piston, cast iron pump.
  • Fitted heavy-duty rubber transport wheels and protected by 360° roll cage.
  • Heavy-duty drive guard protects belt and flywheel that is designed to force air over the pump to aid cooling.
  • Supplied with full CE certification, test certificates and operating/maintenance manual.
  • Features twin gauges and air outlet regulator.
  • Runs on unleaded fuel.
Compressor 50ltr Belt Drive Petrol Engine 4hp

RRP
£1,599.95 exc VAT
£1,919.94 inc VAT

You Pay Only
£1,119.94 exc VAT
£1,343.93 inc VAT

Back To TopBack To Top


Compressor 50ltr Belt Drive Petrol Engine 5.5hp
Model No. SA5055

  • Fully mobile compressor with Honda GX160 5.5hp power unit coupled to heavy-duty, twin piston, cast iron pump.
  • Fitted heavy-duty rubber transport wheels and protected by 360° roll cage.
  • Heavy-duty drive guard protects belt and flywheel that is designed to force air over the pump to aid cooling.
  • Supplied with full CE certification, test certificates and operating/maintenance manual.
  • Features twin gauges and air outlet regulator.
  • Runs on unleaded fuel.
Compressor 50ltr Belt Drive Petrol Engine 5.5hp

RRP
£1,899.95 exc VAT
£2,279.94 inc VAT

You Pay Only
£1,343.94 exc VAT
£1,612.73 inc VAT

Back To TopBack To Top


Compressor 150ltr Belt Drive Petrol Engine 6.5hp
Model No. SA1565

  • Static compressor with Honda GX200 6.5hp power unit coupled to heavy-duty, two stage twin piston, cast iron pump.
  • Pump has heavy-duty full cast cylinders, capped by alloy heads for improved heat dissipation and long life.
  • Heavy-duty drive guard protects belt and flywheel that is designed to force air over the pump to aid cooling.
  • Supplied with full CE certification, test certificates and operating/maintenance manual.
  • Features gauge and air outlet.
  • Runs on unleaded fuel.
Compressor 150ltr Belt Drive Petrol Engine 6.5hp

RRP
£2,749.95 exc VAT
£3,299.94 inc VAT

You Pay Only
£2,015.94 exc VAT
£2,419.13 inc VAT

Back To TopBack To Top

Pillar Drills from

Pillar Drill Floor 16-Speed 1610mm Height 230V
Model No. PDM170F

  • One of a comprehensive range of Premier floor standing pillar drills for the professional workshop.
  • Meets Safety of Machinery (Safety) Regulations 1992 (and amendments).
  • Features heavy-duty aluminium-bodied motor for long and reliable performance.
  • Electrical circuitry protected with no-volt release switch to prevent inadvertent start up and pulley cover protected by microswitch to prevent drill operating when cover is open.
  • Supplied with flip-up chuck guard.
  • Large sized square table fitted with precision rack and pinion height adjustment.
Pillar Drill Floor 16-Speed 1610mm Height 230V

RRP
£479.95 exc VAT
£575.94 inc VAT

You Pay Only
£335.97 exc VAT
£403.17 inc VAT

Back To TopBack To Top


Pillar Drill Floor 16-Speed 1610mm Height 230V
Model No. PDM210F

  • One of a comprehensive range of Premier floor standing pillar drills for the professional workshop.
  • Meets Safety of Machinery (Safety) Regulations 1992 (and amendments).
  • Features heavy-duty aluminium-bodied motor for long and reliable performance.
  • Electrical circuitry protected with no-volt release switch to prevent inadvertent start up and pulley cover protected by microswitch to prevent drill operating when cover is open.
  • Fitted with an integral work light which illuminates the drilling table giving operator a clear view of the drilling process.
  • Supplied with flip-up chuck guard.
  • Large sized square table fitted with precision rack and pinion height adjustment.
Pillar Drill Floor 16-Speed 1610mm Height 230V

RRP
£549.95 exc VAT
£659.94 inc VAT

You Pay Only
£391.97 exc VAT
£470.37 inc VAT

Back To TopBack To Top


Pillar Drill Floor 16-Speed 1635mm Height 230V
Model No. PDM240F

  • One of a comprehensive range of Premier floor standing pillar drills for the professional workshop.
  • Meets Safety of Machinery (Safety) Regulations 1992 (and amendments).
  • Features heavy-duty aluminium-bodied motor for long and reliable performance.
  • Electrical circuitry protected with no-volt release switch to prevent inadvertent start up and pulley cover protected by microswitch to prevent drill operating when cover is open.
  • Fitted with an integral work light which illuminates the drilling table giving operator a clear view of the drilling process.
  • Supplied with flip-up chuck guard.
  • Large sized square table fitted with precision rack and pinion height adjustment.
Pillar Drill Floor 16-Speed 1635mm Height 230V

RRP
£779.95 exc VAT
£935.94 inc VAT

You Pay Only
£531.97 exc VAT
£638.37 inc VAT

Back To TopBack To Top


Pillar Drill Floor 12-Speed 1710mm Height 230V
Model No. PDM260F

  • One of a comprehensive range of Premier floor standing pillar drills for the professional workshop.
  • Meets Safety of Machinery (Safety) Regulations 1992 (and amendments).
  • Features heavy-duty aluminium-bodied motor for long and reliable performance.
  • Electrical circuitry protected with no-volt release switch to prevent inadvertent start up and pulley cover protected by microswitch to prevent drill operating when cover is open.
  • Fitted with an integral work light which illuminates the drilling table giving operator a clear view of the drilling process.
  • Supplied with flip-up chuck guard.
  • Large sized square table fitted with precision rack and pinion height adjustment.
Pillar Drill Floor 12-Speed 1710mm Height 230V

RRP
£1,049.95 exc VAT
£1,259.94 inc VAT

You Pay Only
£727.97 exc VAT
£873.57 inc VAT

Back To TopBack To Top